LED - Driver
SGS NRC-certified
on quality & acoustics
Cut to size
Trim the LED strip to the length you need.
Smart dimmable
Control by remote or smart home.
Seamless fit
A perfect fit with our panels.
Fast delivery
Delivery in 4–7 business days from the Netherlands.
LED- Driver
If you want to use more than 6 LED lights or more than 6 meters of lighting on your panels, you can simply add an additional 60-watt driver. A maximum of 6 LED lights can be connected to one 60-watt driver, with a total length of up to 6 meters of lighting at full power. Thus, a second (or multiple) driver(s) can be added for additional lighting.
A total of up to 5 drivers can be linked together and controlled simultaneously with one remote control or via the Smart app.
Each set contains everything you need to get started right away:
1x Driver
The power supply, which takes up to 6 LED strips.
1x LED strip, 300 cm (3 metres)
Flexible and can be cut to length. Want to connect more strips to your driver? Simply order extra strips.
1x Accessory bag with:
- End caps for a neat finish after cutting
- Extra mounting tape for the back, for when the strip sits a little loose between panels of another brand
Optional accessory
For wireless control and dimming, you can order our touch remote control separately.
Important Note
Please note! Do not cut the LED strip to size while it is plugged into the wall socket. This can be dangerous. Always ensure the LED strip is unplugged before cutting it. The LED strip can be shortened at any position.
Step 1: Installing the LED strip
- Unpack the LED strip from the box.
- Place the LED strip between the slats of your panel, exactly as you wish.
- If necessary, you can cut the LED strip to size. This can be done anywhere on the LED strip.
- Use the tool kit from the box to reseal the LED strip after cutting.
Step 2: Connecting the driver and connect box
- Once the LED strip is placed, slide the white driver and the connect box together.
- Connect the driver's cable to the power supply.
Step 3: Connecting and turning on
- Click the small plug of the LED strip into the driver.
- Then plug the driver's plug into the wall socket.
Step 4: Controlling the LED strip with the remote control
Connect the remote control in 3 steps:
- Press and hold the match button on the driver for 5 seconds until the LED light starts flashing.
- Then press the match button one more time.
- Press the on/off button on the remote control.
- OR connect the LED strip to smart home systems such as Philips Hue, Google Home, and Alexa.
Philips Hue: Open the Philips Hue app and go to "add new light sources." Connect the LEDs by pressing and holding the button on the driver for approximately 8 seconds; the light will start flashing, and the LED strips will also flash. The new light source should now be ready for configuration.
You pay securely at checkout, where you will see the payment methods available in your country.
In the Netherlands, Belgium and Germany you can also pay in 3 instalments or pay later with Klarna.
Fit the strip to your space
Every LED strip can easily be cut to the length you need, for a perfect fit in any room. End caps are included to finish the strip neatly after cutting.
Installed in minutes
Our plug & play LED strips are designed for maximum convenience. Simply press the flexible silicone strip between the slats of your acoustic panel, connect the driver and your lighting works straight away. No tools, no complicated wiring.
With other panels
Does the strip sit a little loose between panels of another brand? Use the mounting tape on the back, if needed with some high-tack adhesive, for a firm hold.
Light colour
Warm white light of 3000 Kelvin, for a soft, atmospheric glow that suits wooden panels.
Dimensions
Each LED strip is 300 cm (3 metres) long and 13 mm wide. Easy to cut to size for a perfect fit between the slats.
Power
Energy-efficient consumption per strip, for efficient lighting without high electricity costs.
Control and dimming
Continuously dimmable via our touch remote control or your smart home.
Expandability
Up to 6 LED strips per driver (6 metres of lighting). Up to 5 drivers can be linked for a total of 30 metres of lighting, controlled with one remote or app.
Smart-home support
Fully compatible with Philips Hue, Google Home, Alexa and Tuya. Control your lighting with voice commands or via your favourite app.
End caps
The included end caps are only needed when you cut the LED strip to size, to seal the end neatly.
Cable lengths
The power cord from the driver to the socket is 2 metres long. The cable between the LED strip and the driver is 3 metres, so you have plenty of room to tuck the driver away.
Linking several drivers
Need more lighting? Link up to 5 drivers for a total of 30 metres of lighting, controlled with one remote or via the smart app.
