LED Installation

Important Note

Please note! Do not cut the LED strip to size while it is plugged into the wall socket. This can be dangerous. Always ensure the LED strip is unplugged before cutting it. The LED strip can be shortened at any position.

Step 1: Installing the LED strip

1. Unpack the LED strip from the box.
2. Place the LED strip between the slats of your panel, exactly as you wish.
3. If necessary, you can cut the LED strip to size. This can be done anywhere on the LED strip.
4. Use the tool kit from the box to reseal the LED strip after cutting.

Step 2: Connecting the driver and connect box

1. Once the LED strip is placed, slide the white driver and the connect box together.
2. Connect the driver's cable to the power supply.

Step 3: Connecting and turning on

1. Click the small plug of the LED strip into the driver.
2. Then plug the driver's plug into the wall socket.

Step 4: Controlling the LED strip with the remote control

Connect the remote control in 3 steps:

1. Press and hold the match button on the driver for 5 seconds until the LED light starts flashing.
2. Then press the match button one more time.
3. Press the on/off button on the remote control.

• OR connect the LED strip to smart home systems such as Philips Hue, Google Home, and Alexa.

Philips Hue: Open the Philips Hue app and go to "add new light sources." Connect the LEDs by pressing and holding the button on the driver for approximately 8 seconds; the light will start flashing, and the LED strips will also flash. The new light source should now be ready for configuration.